Austin Locks

Locksmiths Tips!

How To Get Your Key Unstuck From Your Ignition

Posted by on Feb 1, 2016

How To Get Your Key Unstuck From Your Ignition

Have your car keys been stuck in the ignition when in a hurry? I bet it’s very stressful. You can’t leave the keys in the ignition as there is a high risk that someone can steal your car. If this happens to you next time, you shouldn’t worry. Here are some of the things that you can do to remove the stuck key, brought to us by the guys at AZ Ignition Repair:

Check the position of the key

can't turn ignitionMany people make the mistake of turning the key too far in the “off position” which gets it stuck. Before you do anything you should ensure that the key is in the correct “off position.” Always remember that if you can play the radio, the key is in the wrong position. If you have an automatic car, you should ensure that it’s in the “park” position.

Wiggle the steering wheel

If the key is in the correct position and the car is in the park position, you should wiggle the steering wheel back and forth while trying to pull the key out. When doing this, you should ensure that you are gentle to avoid breaking the ignition.

Jack up the front of the car

Jack up CarThe aim of this is to take the weight of the car off the front wheels. Jacking up also gives the steering column more room to move. While the car is still jacked up, you should wiggle the steering wheel and try to pull the key out.

Use a bobby pin

If you have tried the above options and none works, you should use a bobby pin to remove the small cap that covers the access port of the ignition lock.

Use ice

The idea of using ice is to get the key to contract. You should fill a zip-type sandwich bag half full with ice. If the cubes are too large, you should crush them. You should then wrap the bag around the head of the key then wait for about 15 minutes. After this, you should try to wiggle the key out.

Steps to get your car key out from an ignition

1.Before taking a stab at anything, watch that you’re stopping brake is on. You would prefer not to roll away while you’re excessively centered around getting the way to turning!

2. Apply weight to the key and turn the controlling wheel forward and backward to endeavor to locate a free spot where the key turns. An exceptionally basic explanation behind the key not turning in current autos is that the controlling section lock can be stuck a dilemma. At the point when this happens, you’ll have to apply weight on the ignition component and hold on until it opens. For those with a comical inclination, this is frequently called “the controlling wheel shake.”

3 . On the off chance that you have a programmed transmission, check and ensure the selector is in the Park. A few autos will avert you turning the key if the selector is in any position other than park or nonpartisan; it can be not entirely obvious this when tired or in a rush.

4 . Clean and grease up the lock barrel. Splash a liberal measure of electrical contact cleaner to flush away soil and grime, trailed by a brisk shower of silicone or a drop or two of fluid graphite to grease up. Be mindful so as not to permit it to trickle on upholstery or floor covering. Keep the auto open to anticipate aggregation of exhaust, and maintain a strategic distance from sparkles and open blazes. Once you’ve sufficiently included grease, attempt once more.

5 . On some lock barrels, a tumbler might tie in a bolted position, and the springs can’t push it pull out. Immovably tapping the substance of the lock chamber can discharge the stuck tumbler. A tack sledge is about the ideal size and weight for most key barrels.

7 . Tap the key. Tap the end of the key, while in the ignition, with a mallet or hard question while endeavoring to turn the key. Cautioning, keep an eye out for your fingers.

These are some of the ways of removing a key that has stuck in the ignition. If you have tried all of the options and the key is still stuck, you should consider getting the help of a professional. The good side is that there are locksmiths everywhere. For fast response, you should find a professional who is within your area.